|
U613
Spring Stop and Spacer Mouldings (pr)
€ 7,85
|
|
U750
Ball Grippa Joints-Short Stud 8prs
€ 6,70
|
|
U851
Ball Grippa Joints - Long Stud 8prs
€ 5,45
|
|
U1042
Aerial Mount - Universal
€ 3,65
|
|
U1411
Ball Bearing - 4x8x3 Non Fl. (pr)
€ 4,85
|
|
U1439
Ball Bearing - 5x9x3 Non Fl. (pr)
€ 4,85
|
|
U1573
Titanium Turnbuckle; purple - 53mm (pr)
€ 13,95
|
|
U1954
Very expensive precision thrust bearing for pro-diff applications. Manufactured by the worlds best bearing company in Japan. Use this part for extended diff life and fabulous smoothness.
€ 13,95
|
|
U2053
Titanium Turnbuckle; purple - 25mm (pr)
€ 12,70
|
|
U2148
Ball Bearing - 5 x 10 x 4 Shielded (pr)
€ 4,85
|
|
U2231
Servo Horns
€ 8,25
|
|
U2251
Kwik Klip; 1/8x1.0 and 2.0mm
€ 5,45
|
|
U2459
Diff Balls; T/C 2.5mm pk12
€ 10,95
|
|
U2566
Titanium Turnbuckle - 45mm (pr)
€ 13,95
|
|
U2573
Pro-Diff Screw Set
€ 6,70
|
|
U2574
Ball Bearing - 5 x 9 x 2.5 (pr)
€ 4,95
|
|
U2722
Ball Grippa Joints - U/Sh Stud 4prs
€ 6,70
|
|
U2862
Ceramic Bearing - 5x10x4 Shielded (pr)
€ 9,75
|
|
U3016
Ball Bearing - 10x15x4 (pr)
€ 4,95
|
|
U3017
Super hard Silicone Nitride balls fitted to precision ground races give the ultimate bearing for low friction and long life. The shields are non contact plastic and easily removed and replaced for cleaning.
€ 10,30
|
|
U3019
Ceramic Nitride Diff Balls 2.5mm (pk12) - the worlds hardest ball material for long life and ultra smooth diffs. Team Drivers suggest roughing the diff washer with fine emery to allow the balls to grip.
€ 13,95
|
|
U3129
Alloy Block; Screw - Mi4 (pr)
€ 12,70
|
|
U3130
Alloy Block; Pivot - Mi4 (pr)
€ 12,70
|
|
U3137
Shock Mounting Post - (pr)
€ 6,70
|
|
U3140
Replaces tri lobe washers.
€ 5,45
|
|
U3286
Bumpers and Diff Covers - Cat SX
€ 0,00
|
|
U3291
C/F Shock Mount; Front - Cat SX
€ 17,55
|
|
U3292
C/F Shock Mount; Rear - Cat SX
€ 20,55
|
|
U3297
Servo Mount; LiPo - Cat SX pr
€ 7,10
|
|
U3298
Wing Mount - Off Road
€ 10,30
|
|
U3299
Ball Grippa Joints; X-Long 4prs
€ 7,90
|
|
U3300
Hub Carrier; Front - Cat SX pr
€ 10,30
|
|
U3301
Hub Carrier; Rear - Cat/Cougar pr
€ 10,30
|
|
U3304
Pivot Block; Front - Cat SX pr
€ 12,70
|
|
U3305
Pivot Pin; Screw Type 12mm pr
€ 6,70
|
|
U3306
Pivot Pin; Screw Type 52mm pr
€ 7,90
|
|
U3307
Pivot Pin; Threaded 1/8x50mm pr
€ 6,70
|
|
U3308
Radius Arm; CNC Alloy LH - Cat SX
€ 10,30
|
|
U3309
Radius Arm; CNC Alloy RH - Cat SX
€ 10,30
|
|
U3311
Axle Spacers - 2prs
€ 3,65
|
|
U3312
Steering Post - Cat SX pr
€ 9,10
|
|
U3313
Tube; Wishbone - Cat SX pr
€ 4,95
|
|
U3316
Yoke - Cat SX pr
€ 9,10
|
|
U3329
Alloy Mount; Rear LH Trans-Cat SX
€ 26,65
|
|
U3330
Alloy Mount; Rear RH Trans-Cat SX
€ 26,65
|
|
U3331
Belt; Kevlar 4mmx140t
€ 10,30
|
|
U3332
Belt; Kevlar 4mmx70t
€ 10,30
|
|
U3333
Belt; Kevlar 6mmx62t
€ 10,30
|
|
U3334
Cone; Rear Wheels pr
€ 3,65
|
|
U3335
Covers; Idler Gears - Cat SX
€ 9,10
|
|
U3336
Diff Output; Female - Cat SX
€ 10,30
|
|
U3337
Diff Output; Male - Cat SX
€ 10,30
|
|
U3338
Diff; proSpec Assembled - Cat SX
€ 45,95
|
|
U3339
Eccentric; CNC Alloy - Cat SX pr
€ 13,95
|
|
U3342
Gear; CNC 22t Layshaft - Cat/Cougar
A steel pair of gears 33T 23T for extreme durability is available under U3846 € 7,85
|
|
U3343
Gear; CNC 23t Layshaft - Cat/Cougar
A steel pair of gears 33T 23T for extreme durability is available under U3846 € 7,85
|
|
U3344
Gear; CNC 24t Layshaft - Cat/Cougar
steel pair of gears 33T 23T for extreme durability is available under U3846 € 7,85
|
|
U3345
Gear; CNC 32t Idler - Cat/Cougar
steel pair of gears 33T 23T for extreme durability is available under U3846 € 7,85
|
|
U3346
Gear; CNC 33t Idler - Cat/Cougar
steel pair of gears 33T 23T for extreme durability is available under U3846 € 7,85
|
|
U3347
Gear; CNC 34t Idler - Cat/Cougar
A steel pair of gears 33T 23T for extreme durability is available under U3846 € 7,85
|
|
U3348
Gear; CNC 80t Spur - Slipper
€ 10,30
|
|
U3349
Gear; CNC 81t Spur - Slipper
€ 10,30
|
|
U3350
Gear; CNC 82t Spur - Slipper
€ 10,30
|
|
U3351
Gear 5mm; CNC 83t Spur - Slipper
€ 10,30
|
|
U3352
Idler Post; Fr Belt - Cat SX
€ 4,95
|
|
U3353
Layshaft Assembled - Cat SX
€ 10,30
|
|
U3354
Motor Mount - Cat SX
€ 26,65
|
|
U3355
Mounts; Upper Trans - Cat SX set 4
€ 10,30
|
|
U3356
Pulley; 36t Diff - Cat SX
€ 16,35
|
|
U3357
Pulley; CNC Alloy 20t 4mm - Cat SX
€ 13,95
|
|
U3358
Pulley; CNC Alloy 20t 6mm - Cat SX
€ 13,95
|
|
U3359
Pulley; CNC Alloy 20t Front - Cat SX
€ 13,95
|
|
U3361
Roll Pins Set 4x3/8+8x1/2 - Cat SX
€ 3,65
|
|
U3362
Shaft; Front Idler - Cat SX
€ 6,70
|
|
U3363
Shaft; Rear Idler - Cat SX
€ 6,70
|
|
U3364
Slipper Pad; PTFE Octagon pr
€ 6,70
|
|
U3365
Slipper Set - Cat SX
€ 13,95
|
|
U3366
Spacer Shim; 4x6x2.5 pk 4
€ 3,65
|
|
U3367
Spacers; Layshaft - Cat SX pr
€ 4,85
|
|
U3368
Washers and Pins; Off Road Front Wheels
€ 3,65
|
|
U3370
Alloy Mount; Front Upper Trans pr
€ 20,60
|
|
u3372
One Way Diff; Complete Assy - Cat SX - Replaces the ball diff in the front of the Cat. Gives sharper turn in to corners and faster pull out of the bends. The ball diff gives the easiest drive over rough terrain.
€ 53,25
|
|
U3373
Axle and One Ways - Cat SX
€ 26,65
|
|
U3374
Outputs; One Way - Cat SX pr
€ 13,95
|
|
U3375
Pulley; 35T Overdrive Diff - Cat SX
€ 16,35
|
|
U3376
Pulley; 35T Overdrive One Way - Cat SX
€ 16,35
|
|
U3377
Pulley; 36t One Way - Cat SX
€ 16,35
|
|
U3378
Pulley; One Way 20t - Cat SX
€ 26,65
|
|
U3381
Alloy Wheel Hex; Front - Cat SX pr
€ 9,10
|
|
U3385
Ceramic Bearing set - Cat SX - Full set of 20 pcs of the finest cermic ball bearings. Extremely long life make these very cost effective in the long run. A must if you are looking for the very best efficiency.
€ 78,65
|
|
U3386
Super hard Silicone Nitride balls fitted to precision ground races give the ultimate bearing for low friction and long life. The shields are non contact plastic and easily removed and replaced for cleaning.
€ 10,30
|
|
U3387
Super hard Silicone Nitride balls fitted to precision ground races give the ultimate bearing for low friction and long life. The shields are non contact plastic and easily removed and replaced for cleaning
€ 10,30
|
|
U3379
Roll Bar Set; Front - Cat SX set 3
€ 16,35
|
|
U3380
Roll Bar Set; Rear - Cat SX set 3
€ 16,35
|
|
u3404
Alloy Yoke; 7.5deg - Cat SX (pr)
€ 30,25
|
|
U3407
Wishbone; Front Med Flex - Cat SX pr
€ 10,30
|
|
U3408
Wishbone; Rear Med Flex - Cat SX pr
€ 10,30
|
|
U3410
Sealing Cap; Slipper Adjust - Cat SX pk3
€ 3,65
|
|
U3441
U3441 to U3445 CF Suspension Link Mounts at various widths give the option to tune the camber change and roll centre.
C/F Link Mount; Front 44mm Kit - Cat SX € 9,10
|
|
U3442
U3441 to U3445 CF Suspension Link Mounts at various widths give the option to tune the camber change and roll centre.
C/F Link Mount; Front 38.4mm - Cat SX € 9,10
|
|
U3443
U3441 to U3445 CF Suspension Link Mounts at various widths give the option to tune the camber change and roll centre.
C/F Link Mount; Rear 37.5mm - Cat SX € 9,10
|
|
U3444
U3441 to U3445 CF Suspension Link Mounts at various widths give the option to tune the camber change and roll centre.
C/F Link Mount; Rear 43mm - Cat SX € 9,10
|
|
U3445
U3441 to U3445 CF Suspension Link Mounts at various widths give the option to tune the camber change and roll centre.
C/F Link Mount; Rear 49mm Kit - Cat SX € 9,10
|
|
U3446
C/F Steering Mount and Arm - Cat SX
€ 9,10
|
|
U3479
Ball Grippa Sockets-Short (pk 8)
€ 6,70
|
|
U3499
Roll Bar Blocks - Mi4 pk4
€ 5,45
|
|
U3529
C/F Rear Shock Conversion - Cat SX
€ 15,15
|
|
U3555
Alloy Mount; Rr Upper for Rr Shock Conv-Cat SX pr
Alloy Mount; Rear Upper Trans Housing for Cat SX when used with U3529 Conversion to fit rear shocks on back of the wishbones. Also replaces the standard part U3371 € 23,00
|
|
u3556
Pivot Block M4; Front 10 degree - Cat SX pr
€ 18,75
|
|
u3559
Alloy Yoke; 12.5deg - Cat SX (pr)
€ 30,25
|
|
u3588
Suspension Block Set - Cat SX2
€ 9,10
|
|
u3589
Eccentrics; moulded - Cat SX2 pr
€ 6,70
|
|
u3591
C/F Chassis - Cat SX2
€ 75,00
|
|
U3592
C/F Top Deck - Cat SX2
€ 24,25
|
|
u3593
C/F LiPo Strap + Adhesive Pads - Cat SX2
€ 12,00
|
|
u3594
Chassis S1 - Cat SX2
€ 37,55
|
|
U3595
Top Deck S1 - Cat SX2
€ 10,50
|
|
U3596
LiPo Strap S1 + Adhesive Pads - Cat SX2
€ 7,15
|
|
U3597
Wishbones; Front - Cat SX2 pr
€ 10,30
|
|
U3598
Wishbones; Rear - Cat SX2 pr
€ 10,30
|
|
U3599
Driveshafts; Front - Cat SX2 pr
€ 26,65
|
|
U3600
Driveshafts; Rear - Cat SX2 pr
€ 26,65
|
|
u3603
Alloy Front Blocks; 7.5 deg - Cat SX2
€ 16,35
|
|
U3605
Alloy Rear Hubs; 1 deg - CAT/Cougar SV
€ 35,10
|
|
u3607
FAB Front Adj Braking - CAT SX
Allows the fine tuning of the amount of braking applied to the front wheels. This allows heavy braking going into a corner without the understeeer caused by locked front wheels. € 56,95
|
|
u3608
FAB PTFE Washers + Shims
€ 12,70
|
|
U3609
FAB 20T Pulley+One Way - Assembled
€ 31,50
|
|
u3611
€ 12,70
|
|
U3612
Alloy LiPo Posts - Cat SX2
€ 7,15
|
|
U3613
Front Shock Bracket S1 - Cat SX2
€ 9,10
|
|
U3614
Rear Shock Bracket S1 - Cat SX2
€ 10,30
|
|
u3660
€ 50,80
|
|
u3661
€ 50,80
|
|
u3662
Big Bore Shock Body; Med pr
€ 21,75
|
|
u3663
Big Bore Shock Body; Long pr
€ 21,75
|
|
u3664
Cap for Off Road Big Bore Shocks. See U3784 for Touring Cap.
€ 9,75
|
|
u3665
Big Bore Shock Seal Housing pr
€ 9,75
|
|
u3666
Big Bore Shock Adjusting Collar pr
€ 5,99
|
|
u3667
Parts to rebuild the seals in one pair of Off Road Big Bore Shocks. See U3786 for Touring Big Bore.
€ 7,25
|
|
u3668
Big Bore Shock Rods; Med pr
€ 12,70
|
|
u3669
Big Bore Shock Rods; Long pr
€ 10,70
|
|
u3670
Big Bore Shock; 2 Hole Pistons pr
€ 5,50
|
|
u3671
Big Bore Shock; 4 Hole Pistons pr
€ 5,50
|
|
u3672
Big Bore Shock; 6 Hole Pistons pr
€ 5,50
|
|
u3673
Big Bore Spring Tuning Set; Med 7prs
€ 37,55
|
|
u3674
Big Bore Spring Tuning Set; Long 6prs
€ 37,55
|
|
u3675
Big Bore Spring; Med - 2.0 pr
€ 7,90
|
|
u3676
Big Bore Spring; Med - 2.5 pr
€ 7,90
|
|
u3677
Big Bore Spring; Med - 3.0 pr
€ 7,90
|
|
u3678
Big Bore Spring; Med - 3.5 pr
€ 7,90
|
|
u3679
Big Bore Spring; Med - 4.0 pr
€ 7,90
|
|
u3680
Big Bore Spring; Med - 4.5 pr
€ 7,90
|
|
u3681
Big Bore Spring; Med - 5.0 pr
€ 7,90
|
|
u3682
Big Bore Spring; Long - 1.6 pr
€ 9,10
|
|
u3683
Big Bore Spring; Long - 2.0 pr
€ 9,10
|
|
u3684
Big Bore Spring; Long - 2.5 pr
€ 9,10
|
|
u3685
Big Bore Spring; Long - 3.0 pr
€ 9,10
|
|
u3686
Big Bore Spring; Long - 3.5 pr
€ 9,10
|
|
u3687
Big Bore Spring; Long - 4.0 pr
€ 9,10
|
|
u3768
Alloy Steering Conversion - Cat SX2
€ 23,00
|
|
u3769
C/F Rear Link Mnt; Rr Mntd Shocks - Cat SX2
Carbon Fibre Rear Link Mount that allows the fitting of the rear shocks to the rear of the wishbones. This is recommended for bumpy tracks. Can ONLY be fitted to Cats with U3555 Alloy Rear Top Trans Housings. € 9,10
|
|
u3770
These Big Bore Pistons feature very rounded corners on the pistons which changes the response of the damping.
€ 5,50
|
|
u3771
These Big Bore Pistons feature very rounded corners on the pistons which changes the response of the damping.
€ 5,50
|
|
u3794
Steel Idler Gear Upgrade - CAT SX
€ 18,75
|
|
u3795
Layshafts Set for Steel Idlers - CAT SX
€ 10,30
|